Furman PQ-6
Moderator: Dave Mudgett
-
Dana Murphy
- Posts: 186
- Joined: 8 Jun 1999 12:01 am
- Location: Clarksburg WV USA
Furman PQ-6
Does enyone have setting for PQ-6 by Furman thanks dana
-
Dennis Detweiler
- Posts: 3899
- Joined: 8 Dec 1998 1:01 am
- Location: Solon, Iowa, US
I have a PQ3. I think the PQ6 is just two PQ3's together? Same on top and bottom? For stereo? I don't use my PQ3 anymore, but this should get you in the ballpark:
First three knobs:
60hz, width around 3:00 and level to the right of 12:00.
Second three knobs:
700 to 800hz, width around 3:00 and level to left of 12:00
Third three knobs:
2000 - 4000hz, width around 3:00 and level right of 12:00
You'll have to tweak it from there to your own taste. First, play around with the widths after the above settings. Then with the levels.
Assuming you're using it for a stand alone preamp.
First three knobs:
60hz, width around 3:00 and level to the right of 12:00.
Second three knobs:
700 to 800hz, width around 3:00 and level to left of 12:00
Third three knobs:
2000 - 4000hz, width around 3:00 and level right of 12:00
You'll have to tweak it from there to your own taste. First, play around with the widths after the above settings. Then with the levels.
Assuming you're using it for a stand alone preamp.
1976 Birdseye U-12 MSA with Telonics 427 pickup, 1975 Birdseye U-12 MSA with Telonics X-12 pickup, Revelation preamp, Ibanez Analog Mini Delay and Hall Of Fame Reverb, Crown XLS 1002, 2- 15" Eminence Wheelhouse speakers, ShoBud Pedal, Effects Pedals. 1949 Epiphone D-8.